This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |
| itops:dell_perc_h710p_raid_controller [2025/09/23 12:54] – [1. Initial Setup: The `perccli` Tool] fabricio | itops:dell_perc_h710p_raid_controller [2025/09/23 12:55] (current) – [1. Initial Setup: The `perccli` Tool] fabricio |
|---|
| |
| The official Dell tool, ''perccli'', is distributed as an ''.rpm'' package. On Debian-based systems like Ubuntu, you must first convert it to a ''.deb'' package using ''alien''. | The official Dell tool, ''perccli'', is distributed as an ''.rpm'' package. On Debian-based systems like Ubuntu, you must first convert it to a ''.deb'' package using ''alien''. |
| You can download the ''.rpm'' (or rather the ''.tar.gz'' containing the ''.rpm'') from [[https://www.dell.com/support/home/de-ch/drivers/driversdetails?driverid=wd0r5|Dell Support]] | |
| |
| **NOTE:**You will need to download the ''perccli'' tool from the Dell support website. Search for your server model or "PERC H710P" and find the appropriate download for Linux. | **NOTE:**You will need to download the ''perccli'' tool from the [[https://www.dell.com/support/home/de-ch/drivers/driversdetails?driverid=wd0r5|Dell support website]]. Search for your server model or "PERC H710P" and find the appropriate download for Linux. The ''.rpm'' is usually within a packaged ''.tar.gz''. |
| |
| First, install ''alien'' if you don't have it: | First, install ''alien'' if you don't have it: |